How to Replace a UPVC Door Replacement Lock
If your door lock begins becoming stuck or isn't working as it ought to, it's time to think about replacing it. upvc door locks replacement may sound complicated, but the process is easy and doesn't require a professional locksmith.
A few basic tools, a bit of patience, and lots of care is all you need. Here's how to do it:
Measure the Door
If you're struggling to lock your uPVC door, or it won't close or lock properly, it may be time for a replacement. If you've just moved into a brand new home, a tenant moved out without returning keys, or if your multipoint gearbox is showing signs wear and tear, switching the barrel of your lock to an entirely new one will offer an additional layer of security.
It is necessary to take measurements prior to buying a new lock. This will ensure that the new cylinder will fit correctly and not interfere with your home's security. The backset is the most crucial. This is the distance from the middle of the keyhole bore hole to the edge of the door. It's typically 2 3/8 or even 2 3/4 inches. Use a measuring tape or ruler to measure this measurement and write the results on a piece of paper or notepad.
It is also important to know what the thickness of the faceplate is. This is the measurement of the piece that covers the lock mechanism. If possible, purchase an alternative lock manufactured by the same manufacturer since they'll be made in the same way. If you are unable to locate the name of the manufacturer or mark on the lock, measure the length of the cylinder. You can also determine the width of the cylinder by placing a pencil on the keyhole.
Once you have the dimensions you can begin to remove the old cylinder. Begin by loosening the screw that holds the handle together using a Phillips-head screwdriver, then loosen the screws that join the interior and exterior handles together. Once these screws are removed, you can then remove the barrel screw located on the exterior handle. Then remove the cylinder.
If the cylinder is stuck inside the lock, try using WD-40 or other lubricant to help you get it out. It is essential not to push it out. Forcing it out can cause damage to your lock's internal gearbox. Consider upgrading to a lock with anti-snap and anti-bump security. This will help to make it more resistant to attacks from thieves.
Source the Lock
When purchasing a new door lock you need to consider some factors. Make sure you've got the right size cylinder for your door and that you're buying from a trusted brand to ensure a proper fit and high-quality. You'll also require a few basic tools for the job, including a screwdriver, tape measure and rubber mallet.
There are a variety of signs that your upvc door lock is destined to fail and requires replacement. Typical problems include visible damage to the lock or a handle that is loose and isn't fitting properly. If the lock is jamming or doesn't lock at all, it's time to consider replacing it.
After you've chosen the best lock, you must get it installed correctly so that it works properly and locks securely. Follow the manufacturer's instructions to fix the new multipoint lock mechanism onto the door's upvc panel and then attach the appropriate handles and faceplates. Once everything is installed check the mechanism by locking and unlocking the door from both inside and out. When you've finished the job, it's time for celebration.
The process of replacing a door lock made of upvc may sound intimidating but it's actually an easy DIY project and can be done without needing a locksmith. It's not difficult to change your lock if one is aware of the indicators and have the appropriate tools.
Keep in mind that just like any other moving part the door lock made of upvc will benefit from some lubrication to run smoothly. A few sprays or graphite powder can extend their lifespan by reducing excessive friction. Regular cleaning of your door lock mechanisms with WD-40 as well as a damp cloth can help to keep them in good condition.
Take the Cylinder off
If you're having difficulty with your upvc doors and windows, it could be time to change the lock barrel. This is a straightforward DIY project and can be completed in only several minutes, and is an effective method of maintaining the security of your home. This project requires you to identify the brand of the lock in order to locate a suitable replacement.
A faulty door lock can be a major pain and a significant security risk. Locks on uPVC doors are more prone to malfunction, and it is crucial to check them on a regular basis. Experts recommend changing your lock every seven to eight years. If your lock is suffering from severe damage or you're not happy with its performance, it's certainly worth seeking help from an expert.
For uPVC it is a pin system called a euro cylinder will be employed in most instances. They are easy to use and are not likely to fail to function however, they could be vulnerable to attack. In the end, it's worth replacing your lock's cylinder with one that is more modern and has anti-snap as well as anti-bump features to prevent burglary.
The first step to change your uPVC lock is to remove the handle and exposing the old cylinder. This can be a little difficult because there are often several screws concealed beneath the handles, so be sure you have a screwdriver handy. The next step is to gently tug and wiggle the cylinder until you loosen it. Once it does, you can remove it from its socket.
Once you've sourced an appropriate replacement, it's just a case of screwing it in and reversing the removal process. Be cautious not to tighten too much as this can cause the cylinder to get stuck in the door and stop working as it should. Test the uPVC replacement lock by opening it and closing it both from both sides. You should be able now to lock and unlock the door with your key. If not, make sure that the screws are tight and try again.
Install the Lock
You'll have to do some research to make sure that the lock you pick is suitable for your door. You'll need to be aware of the faceplate and backset measurements - which is the distance from the edge of the door to the centre of the cylinder or handle - and the type of lock to ensure that the new lock is fitted correctly without compromising security.
Once you've finished that, you can begin installing the new lock. It is recommended to prop the door open or secure it to ensure that it doesn't shut during the process. First, loosen the screws that hold the handle in place by using a Phillips-head screwdriver. After the screws are removed and the handle is free of screws, you can slide the inside handle and outer handle apart.
The next step is to take off the old cylinder, which you'll want to do by unscrewing it from its barrel. After you've removed the cylinder, you'll be able to install the replacement lock, making sure that you follow the guidelines for the particular model you have. Once the lock is in place, you can test it by opening and closing the door from both the inside and the outside, then locking and unlocking it from the interior, and then trying it again.
There are a few reasons you may need to change the lock on your uPVC doors. You may have just moved in and not had a key. The previous tenant may not have returned it. Or you might want to upgrade your lock to one that is more secure. It isn't going to take more than five minutes to replace the lock cylinder.
No matter if your uPVC doors are single-point or multipoint locks, they all use the same mechanism. This means they can be susceptible to issues occasionally that could result in them not being able to close or getting stuck. They can be caused by wear and tear, weather conditions, or simply due to daily use. The majority of these issues are easily corrected with a little maintenance or hiring a locksmith.